Pancake air filter element
-
- Member
- Posts: 201
- Joined: Wed Aug 19, 2020 11:22 am
- Location: Dorset UK
Pancake air filter element
I have the late style G80CS with the side pancake filter, the PO had fitted it without a rubber gasket* between the casing and the outer plate making it completely ineffective, the element*, which is a corrugated mesh and felt affair is useless and clogged through age, are these parts* available anywhere, I did see that there is a G9/G11 gauze filter available, maybe this will fit with a few mods?
- dave16mct
- Member
- Posts: 3281
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: Pancake air filter element
Why not take it to Halfords and find a car element to fit.
Dave.
Dave.
-
- Member
- Posts: 201
- Joined: Wed Aug 19, 2020 11:22 am
- Location: Dorset UK
Re: Pancake air filter element
In the light of unobtainable metal gauze filters, I'm going to go with an oiled foam element as the principle reason is to keep the c**p out of a newly built engine, not to keep originality for the sake of it.
-
- Member
- Posts: 376
- Joined: Wed Feb 01, 2012 1:22 pm
- Location: Vestland NORWAY
Re: Pancake air filter element
RG, let us know which foam element will fit the air filter housing. I am looking for the same. I'd prefer a filter off some car model (maybe it would require an adaptor), but a foam filter might do also. A foam filter needs more maintenance than a paper element. Are airways inside the air filter housing suitable for a foam filter at all? Axial flow is usually what foam filters are designed for. The original air filter was designed for radial flow, if I remember correctly. Radial air flow allows for much lower air speed, less pressure drop, less suction noise, an a better catch of debris.
- Knut
- Knut
-
- Member
- Posts: 201
- Joined: Wed Aug 19, 2020 11:22 am
- Location: Dorset UK
Re: Pancake air filter element
I bought a dual density airfilter foam approx 1" thick sheet off the 'bay and cut it up, glued it and added some filter mousse, seems to be ok so far. It was not expensive and fits fine. I tried every place I know including Vokes who made the original but no luck.