Hi can anyone give me the part numbers for clutch and front brake cables for a 1960 g12
Also front brake really sequels when applied any ideas as to why
Thanks Ian
Squeaking brakes and cable part numbers
-
- Member
- Posts: 192
- Joined: Mon Nov 16, 2015 6:08 pm
- Location: east sussex
- ajscomboman
- Member
- Posts: 3981
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: Squeaking brakes and cable part numbers
022874 or T415 from club spares for brake
026250 or T750 for clutch
Squealing is either down to rust or rivets either way it's a strip and clean.
026250 or T750 for clutch
Squealing is either down to rust or rivets either way it's a strip and clean.
-
- Member
- Posts: 192
- Joined: Mon Nov 16, 2015 6:08 pm
- Location: east sussex
Re: Squeaking brakes and cable part numbers
Thanks for part nos
the linings are brand new any ideas would be appreciated
Thanks Ian
the linings are brand new any ideas would be appreciated
Thanks Ian
- ajscomboman
- Member
- Posts: 3981
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: Squeaking brakes and cable part numbers
Glaze on the brake drum? That's the only other reason it'd squeal. A strip is the only way you're going to find out what's going on.willowbedone wrote:Thanks for part nos
the linings are brand new any ideas would be appreciated
Thanks Ian
As a matter of interest where did you get the brakes from, a high sintered metal content would cause squeal but not sure if that's available anymore for our machines as the material isn't recommended for drum bakes.
-
- Member
- Posts: 192
- Joined: Mon Nov 16, 2015 6:08 pm
- Location: east sussex
Re: Squeaking brakes and cable part numbers
Purchased them at kempton park last Saturday