AJS and Matchless Owners Club Limited

AJS & Matchless Owners Club

 Home >> Articles >> Technical Tips⊂_nameTwin Changes >> Brakes

 Technical Tips⊂_nameTwin Changes: Brakes ( 9 articles)

Brake arm set up
(Added : 10/26/2019 10:09:27 PM Hits : 374 Rating: 10 Votes: 1)
Some confusion about setting up brakes To put things correct, the angle between cable or rod MUST be an Acute or less than 90 deg.

Front forks and Brake.
(Added : 2/1/1984 12:00:00 PM Hits : 1442) PDF File
My Experience is with half-width hubs but the advice could probably be adapted for other brakes. Before giving up in despair at ever having good front brakes, try checking the following...

A Quick Stop
(Added : 7/29/2006 10:28:44 AM Hits : 5401 Rating: 9 Votes: 3)

Brake Arm efficienty - a couple of solutions
(Added : 4/1/2000 Hits : 4015 Rating: 8 Votes: 1) PDF File
AS we all know, for the most effective brake leverage, the brake arm needs to be just over 90 from the direction of pull with the brake hard on. If it is significantly less or more than 90 then the leverage and efficiency of operation are reduced.

Brakes - assembly tip
(Added : 4/1/1996 Hits : 3932 Rating: 10 Votes: 1)
To ensure good brakes when replacing front wheel for any reason, loosely assemble the wheel in the forks and fit brake cable.

Front Brake hydraulics by Malcolm Saggers
(Added : 8/1/1996 Hits : 3725 Rating: 10 Votes: 1) PDF File
Front Brake hydraulics by Malcolm Saggers

Front Brake - Stay breakage
(Added : 1/1/2001 Hits : 3868) PDF File
Front brake stay failure and how to prevent it

Front brake - reversal
(Added : 12/1/1998 Hits : 3844)
Front brake position

Front brake - clevis reversal
(Added : 1/1/2000 Hits : 3725 Rating: 10 Votes: 1)
Correct orientation of the front brake clevis

Page 1 of 1

Add an Article

Snowplough Set as your default homepage Add favorite Privacy MaxWebPortal   2000-2020 Jampot All Rights Reserved. MaxWebPortal.info Snitz Forums Go To Top Of Page