R_Nairtvm wrote:Would appreciate if anyone who has a original side stand, can kindly give me the diamentions of the item - specially the length and the width - inside of the top yoke.
Hi Ram. A pal is restoring a 1952 500 twin which has the same stand as your '55 model.
He is about to fit the side stand so I will drop round and take some photos and dimensions today and post them on here..
Thanks a lot mate ! I will be much obliged.
I eagerly await to hear from you. Have sent you a PM with my mail id, may be easier to send the pics if you so prefer.
Bike is doing fine and chugging along, whenever I manage to take her out. Slowly correcting the inaccuracies one by one or collecting the parts to do the same at a near future. One item I need to source is the correct rear hub.
The AJS Parts list for 1955 in Jampot site lists the Rear Hub part # as 21580. But I have been getting offers for 21581 from various sources.
One will be the casting number and the other will be the machined item ready to fit. So they will be OK. A picture would make sure, you can't mistake the steel pins sticking out!
Dave.
Do you happen to have a picture of the right one ? What are the pins you are mentioning ? The Parts manual picture does not show any pins sticking out.
Best Regards & Ride Safe
Ram Nair
dave16mct wrote:One will be the casting number and the other will be the machined item ready to fit. So they will be OK. A picture would make sure, you can't mistake the steel pins sticking out!
Dave.