CDI unit

This area is for discussion/information on the "modern" AJS motorcycles manufactured in China from 2006 onwards.
Locked
joker7
Posts: 7
Joined: Wed Apr 04, 2012 8:00 pm
Location: UK

CDI unit

Post by joker7 »

Have a problem with the CDI unit - and need a replacement :

Bike AJS ESO 125

The unit i have is:
SMBD125YW
070101
0206



Anyone have any ideas where I can get one from (AJS want £70) or any other that will work - seen a lot on ebay for pitbikes ect ? UK or far east would be best to keep shipping cost down..


Cheers
Chris

PS:

No spark at the plugs - so run all the electrice test ect so about 98% sure but always have that niggling doubt, it would help if I had a working bike near by to swap it out as a final test .
User avatar
dave16mct
Member
Posts: 3246
Joined: Mon Jan 01, 1990 12:00 am
Location: LANCASHIRE UK

CDI unit

Post by dave16mct »

It might be the coil, a lot cheaper than a CDI unit.
User avatar
Ian5913
Posts: 225
Joined: Mon Jan 01, 1990 12:00 am
Location: BERKSHIRE UK

CDI unit

Post by Ian5913 »

There are a lot of CDI units on ebay for AJS not sure if they will match your model. Genuine VS reproduction parts always a gamble. Best of luck Ian
joker7
Posts: 7
Joined: Wed Apr 04, 2012 8:00 pm
Location: UK

CDI unit

Post by joker7 »

AJS do not have a spare CDI unit or data on the unit which is not helping matters...

Have a loan unit coming from Spain from a guy over at Alternative Cruisers so I can make sure it's the CDI unit.

Have also ordered one that looks like it from ebay fingers crossed.

Chris
Locked