Model 8 sidestand
-
- Posts: 46
- Joined: Thu Aug 11, 2011 5:42 pm
- Location: NORTHAMPTON UK
Model 8 sidestand
Has anyone found an alternative sidestand for the model 8 instead of the original which are a bit rare.
- BigAl350
- Posts: 154
- Joined: Sat May 22, 2010 4:32 pm
- Location: BERKSHIRE UK
Model 8 sidestand
I posted something about this a few months back - one of the stalwarts of the forum had mentioned that an Indian Enfield side-stand could be modified for the Lightweights but I never managed to get any definitive info about what needed to be done - it MAY have appeared in an old Jampot. I can quiz that member again but there could be your starting point. I see loads of the Indian sidestands on eBay, fairly cheap, around £15-25, which compares well to the outrageous £90-100 wanted for one from some places!
Al
Al
Al Bolton, G4VSQ
1960 Matchless G5 (Off the road for now, maybe for sale?)
1960 AJS Model 8 (Just passed MoT)
1962 AJS Model 8 (Still lurking in a Devon shed in bits)
1960 Matchless G5 (Off the road for now, maybe for sale?)
1960 AJS Model 8 (Just passed MoT)
1962 AJS Model 8 (Still lurking in a Devon shed in bits)
-
- Posts: 120
- Joined: Mon Aug 20, 2007 9:00 pm
- Location: BERKSHIRE UK
- BigAl350
- Posts: 154
- Joined: Sat May 22, 2010 4:32 pm
- Location: BERKSHIRE UK
Model 8 sidestand
That's well over £100 for the stand, spring, bolt and bracket! Their stuff is good but...
BigAl
BigAl
Al Bolton, G4VSQ
1960 Matchless G5 (Off the road for now, maybe for sale?)
1960 AJS Model 8 (Just passed MoT)
1962 AJS Model 8 (Still lurking in a Devon shed in bits)
1960 Matchless G5 (Off the road for now, maybe for sale?)
1960 AJS Model 8 (Just passed MoT)
1962 AJS Model 8 (Still lurking in a Devon shed in bits)
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Model 8 sidestand
Theres a Jawa stand that will fit, BUT, it fits in place of a near side footrest.
- michael_s
- Posts: 34
- Joined: Wed Dec 10, 2008 8:55 am
- Location: AUSTRIA
Model 8 sidestand
I have the pdf of the indian sidestand conversion article, send me your e-mail-address and I´ll forward it to you (or anyone else .
I decided to buy the "original" sidestand from JSL, not cheap and needed some grinding, but does the job...
I decided to buy the "original" sidestand from JSL, not cheap and needed some grinding, but does the job...
....................
It´s a barrel, not a watch!
It´s a barrel, not a watch!
- Eamonn
- Webmaster
- Posts: 2235
- Joined: Sun Jan 01, 1995 12:00 am
- Location: OXFORDSHIRE UK
- Contact:
Model 8 sidestand
quote:
I have the pdf of the indian sidestand conversion article, send me your e-mail-address and I´ll forward it to you (or anyone else .
If you send me a copy I'll put it into the Technical Articles area for all to see.
I have the pdf of the indian sidestand conversion article, send me your e-mail-address and I´ll forward it to you (or anyone else .
If you send me a copy I'll put it into the Technical Articles area for all to see.
Corners like a Lego man
- bigwol
- Member
- Posts: 1497
- Joined: Fri Mar 04, 2011 10:45 pm
- Location: ESSEX UK
Model 8 sidestand
I'd remove your email from the forum David and in future only send it by PM.
You are asking to be inundated with spam!
You are asking to be inundated with spam!
It's all just riding motorbikes