1950 G3L Piston

DWS · Post by **DWS** » Tue May 31, 2011 5:58 pm

Started a new post, not wanting to hijack someone else's post. My piston has the following info on the inside:

HEPLEX 10455 3021 AM 405 M52

On the crown it has: +0.30 Made in England Front

Can anyone identify it?

spindle · Post by **spindle** » Tue May 31, 2011 9:30 pm

Hmm.. its a bit lonley in here? try re-posting in the help/ general forum! i did the same for some reason
regardsEdited by - spindle on 31 May 2011 8:31:35 PM

Lance · Post by **Lance** » Tue May 31, 2011 9:57 pm

Hi Dave,

Are you sure it isn't 10465? That would suit your model.

Check this out...line number 8:

http://archives.jampot.dk/Technical/Pis ... x-1962.pdf

Regards,
Lance

DWS · Post by **DWS** » Tue May 31, 2011 10:56 pm

Hi Lance, Your correct it is 104065

The 6 does look like a 5 at first glance.

wilko · Post by **wilko** » Wed Jun 01, 2011 1:00 am

If it's wirewound, guard it with your life !

DWS · Post by **DWS** » Wed Jun 01, 2011 9:47 am

Sadly not wire wound I'm afraid

As a matter of interest, who were the original suppliers of pistons for AJS/Matchless in the 1940s/50sEdited by - DWS on 01 Jun 2011 2:09:23 PM

Don Madden · Post by **Don Madden** » Wed Jun 01, 2011 5:24 pm

BHB. Cheers, Don.