I'm just putting the finishing touches to my front forks and wondered if it was correct to put "TELEDRAULIC" transfers onto them.
If so - where do they go on the tubes? I've looked through the photo gallery and some are forward facing and others side facing. They are not listed in the parts book with the other transfers.
1941 G3L Military TELEDRAULIC transfers
-
- Posts: 28
- Joined: Sun Sep 19, 2010 12:52 pm
- Location: EXETER UK
-
- Posts: 7721
- Joined: Tue Nov 22, 2005 6:01 pm
- Location: UK
1941 G3L Military TELEDRAULIC transfers
they dont go on the tubes where you so often see them, but on the bottom yokes, it matters not whether they face forward or to the side somewhat.
When they were put on nobody cared.
Now, all together, one rivet.... two rivet......
When they were put on nobody cared.
Now, all together, one rivet.... two rivet......
-
- Posts: 28
- Joined: Sun Sep 19, 2010 12:52 pm
- Location: EXETER UK
1941 G3L Military TELEDRAULIC transfers
Mant thanks - I had seen them on the yokes on one of the bikes in the gallery.
R
R
-
- Posts: 7721
- Joined: Tue Nov 22, 2005 6:01 pm
- Location: UK
1941 G3L Military TELEDRAULIC transfers
yes only one, mostly they get stuck in all sorts of odd places