Gasket for G9
-
- Member
- Posts: 1722
- Joined: Thu May 10, 2007 5:26 pm
- Location: NORTHANTS UK
Gasket for G9
When I go to Switzerland this summer, 2-up plus camping gear, I shall carry 2 of the new copper headgaskets, that means I will have no problems with the old "dodgy " composites ones!!
Alan [Morini] Jennings
-
- Member
- Posts: 790
- Joined: Sat Jan 01, 1994 12:00 am
- Location: LINCOLNSHIRE UK
Gasket for G9
WERE THE SPACER SPOOLS DELETED FOR 1960? MY 650 DOESNT HAVE THEM FITTED
-
- Member
- Posts: 2882
- Joined: Mon Jan 01, 1990 12:00 am
- Location: USA USA
Gasket for G9
I have downloaded both the 1950 Matchless & 1950 AJS spares lists. Use the F. Neil books for service info.
The spools were deleted for 1960-up engines.
Cheers, Don.
The spools were deleted for 1960-up engines.
Cheers, Don.
-
- Posts: 2337
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: victoria AUSTRALIA
Gasket for G9
Strange? My '63 needed them, that's why i machined slightly longer than the originals.They must have used shorter throughstuds at one time?
-
- Member
- Posts: 2882
- Joined: Mon Jan 01, 1990 12:00 am
- Location: USA USA
Gasket for G9
I have had several 650s, up to 1962. They had only enough threads protruding for the flat washer & nut. I cannot speak for later engines. Cheers, Don.