fork puller
- Rick.Edwards
- Deceased
- Posts: 681
- Joined: Thu Feb 27, 2003 12:00 am
- Location: BEDFORDSHIRE UK
fork puller
The easiest way is using a factory contraption legs are in or out in seconds.you can borrow it but you'll have to come and fetch it yourself dave,
The piston ring King
- arsey30
- Posts: 143
- Joined: Sun Nov 09, 2008 10:44 pm
- Location: SURREY UK
fork puller
Thanks Rick,
But one is on its way now,
Dave.
But one is on its way now,
Dave.
- Rick.Edwards
- Deceased
- Posts: 681
- Joined: Thu Feb 27, 2003 12:00 am
- Location: BEDFORDSHIRE UK
- arsey30
- Posts: 143
- Joined: Sun Nov 09, 2008 10:44 pm
- Location: SURREY UK
fork puller
What is that.
- TommoT
- Member
- Posts: 1602
- Joined: Mon Jan 01, 1990 12:00 am
- Location: DENMARK
fork puller
Remember when putting the forkleg back into the yoke to ensure that surfaces are clean and rust free. This will make future operations in this area a lot easier. Apply a good dab of "Never Seez" it will help keeping rust and corrosion at bay. The name of this substance is not a joke, it is a really good product by, I think, Permatex or Permalock.
TommoT
Ride Your Motorcycle As If Your Life Depended On It - Cos' It Does!
Ride Your Motorcycle As If Your Life Depended On It - Cos' It Does!
- Rick.Edwards
- Deceased
- Posts: 681
- Joined: Thu Feb 27, 2003 12:00 am
- Location: BEDFORDSHIRE UK
fork puller
23b is an old pushrod from a single, with the adjuster removed. It then screws onto the end of the damper rod assembly so that you can pull it up and then screw onto top nuts. tune in next week for tool number 25c.
The piston ring King
- arsey30
- Posts: 143
- Joined: Sun Nov 09, 2008 10:44 pm
- Location: SURREY UK
fork puller
Whats wrong with a piece of wire?
I dont have a spare pushrod, but I could always take the head off to borrow one.
I hope tool number 25c details will be forthcoming before I complete the service
Is there a "useful tips" section on the site?
Dave.
I dont have a spare pushrod, but I could always take the head off to borrow one.
I hope tool number 25c details will be forthcoming before I complete the service
Is there a "useful tips" section on the site?
Dave.
- Rick.Edwards
- Deceased
- Posts: 681
- Joined: Thu Feb 27, 2003 12:00 am
- Location: BEDFORDSHIRE UK
fork puller
nothing wrong with wire its just easier with an old rod.If you send me a couple of stamps i'll pop one in the post once used you'll be amazed at this old guard tip. PM your address if you want one.
The piston ring King
-
- Member
- Posts: 790
- Joined: Sat Jan 01, 1994 12:00 am
- Location: LINCOLNSHIRE UK
fork puller
I own service tool 23b mk.II Its a piece of string about 2 foot long
- Rick.Edwards
- Deceased
- Posts: 681
- Joined: Thu Feb 27, 2003 12:00 am
- Location: BEDFORDSHIRE UK
fork puller
Keith i am disapointed string indeed ok i'll bring a pushrod up to meggies next week then.Visiting parents
The piston ring King