Hello all,
what is the difference in mm or inches of the height of the cut away on the Amal Monoblock trottle valve cutaway from a 3 1/2 to a 4 one?
thanks
Geoffrey
Argentina.
Throttle valve cutaway
-
- Posts: 32
- Joined: Thu Jun 16, 2005 1:00 am
- Location: ARGENTINA
- bjork
- Member
- Posts: 1908
- Joined: Wed Jan 01, 1997 12:00 am
- Location: LEICESTERSHIRE UK
- Location: Leicestershire
Throttle valve cutaway
Hello Geoffrey, from memory, each 1/2 on the code equals 1/16" of an inch. So a No 4 cutaway is 1/4" high from the bottom of the slide. A 3 1\2 is 3/16" high. (So richer than a 4)
The best bet is to have a look at Hitchcocks site (the Enfield dealers) they have the Amal tuning and service details there,and a good spares service too.
Steve
P.s. It's probably already in the tech articles too!
The best bet is to have a look at Hitchcocks site (the Enfield dealers) they have the Amal tuning and service details there,and a good spares service too.
Steve
P.s. It's probably already in the tech articles too!
Using yesterdays technology to create tomorrows problems today