I have recently applied "waterside transfers" purchased from the spares scheme, the most awkward was the rear mudgard, this was then finished with 2 coats of Humbrol gloss enamel and has turned out perfect (to me)
The tool box and oil tank transfers were treated to the same care at the same time, but seem not to have stuck to the surface beneath?? this was noticed while varnishing, am I doing something wrong? or have other come unstuck (no pun intended) with these particular transfers, best regards in anticipation, Ian.
Adhesion of transfers.
-
- Member
- Posts: 64
- Joined: Sun Dec 13, 2020 9:01 am
- Location: Leicestershire. UK
Adhesion of transfers.
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 64
- Joined: Sun Dec 13, 2020 9:01 am
- Location: Leicestershire. UK
Re: Adhesion of transfers.
Missing photo.
You do not have the required permissions to view the files attached to this post.