AJS & Matchless Owners Club

Im assembling the forks. 1959 350.
I have 2 bottom cups for the bearings i have the bearings. The manual/parts book. Show only one cup for the top bearings (i have this and the bearings)
The face in the head set is flat and no seat for the bearings??? Is this correct or am i missing a seat that may have come out from the top yoke ?
Steve

Hi Steve,
the 2 rounded cups go in the frame. The cup with the taper goes on the bottom yoke. The cup with the square section goes in the top yoke. I think you've mislaid it.
Dave

I will have another look.
Cheers