Good morning
Can anyone tell me if the pin drive shaft on a jaeger chronometric is removable please? They don't have a retaining clip/plate like the square drive ones do. I don't want to punch it out and break the casting unless it's meant to be driven out!?
Many thanks
Adam
Smiths jaeger chronometric speedometer pin drive replacement
-
adz25
- Member
- Posts: 196
- Joined: Tue Sep 20, 2011 1:29 pm
- Location: CAMBRIDGESHIRE UK
-
adz25
- Member
- Posts: 196
- Joined: Tue Sep 20, 2011 1:29 pm
- Location: CAMBRIDGESHIRE UK
Re: Smiths jaeger chronometric speedometer pin drive replacement
If you stare at for something long enough you find the answer!
For future reference there is a very small mild steel rivet pin which joins the worm drive sleeve to the pin drive shaft. Carefully drill it out and it separates into a number of pieces!
Best regards
Adam
For future reference there is a very small mild steel rivet pin which joins the worm drive sleeve to the pin drive shaft. Carefully drill it out and it separates into a number of pieces!
Best regards
Adam