AMC gearbox sprocket a bit difficult to turn

Information relating to the Matchless G3 or AJS Model 16 350cc Heavyweight
Post Reply
tippi11
Member
Posts: 72
Joined: Sat Dec 01, 2018 9:59 pm
Location: Germany

Re: AMC gearbox sprocket a bit difficult to turn

Post by tippi11 »

It turned out that there was already a "good" spider with sufficient stop mounted. I think it settled down a bit over time, and I used a file brush to remove minimum material at the spider´s rear (1/10-2/10 mm). After reassembling and sprocket turnability inspection everything seems to be fine now.
Thanks for your replies, Peter
Top
Post Reply

Return to “G3 / Model 16”