G80s
- Expat
- Member
- Posts: 1037
- Joined: Thu Nov 12, 2015 2:22 pm
- Location: Tennessee, USA
Re: G80s
The oil pump plunger I believe. Should be a paper gasket under it.
Plate can be removed, cleaned up and replaced with new gasket without issue, assuming the threads are ok.
Steve
Plate can be removed, cleaned up and replaced with new gasket without issue, assuming the threads are ok.
Steve
Keep shiny side up.
These are my principles, if you don’t like them, I have others. (Groucho Marx)
These are my principles, if you don’t like them, I have others. (Groucho Marx)
-
- Member
- Posts: 1587
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WEST SUSSEX UK
Re: G80s
great animation of the single oil pump system explains how it works
https://www.jampot.com/article_print.asp?id=519
https://www.jampot.com/article_print.asp?id=519