Anyone know what spring is right for the cush drive I would guess the OD would be about 1 3/4 and the ID 34mm ish (sorry for the mixed measurements)
Cheers
1933 model 12 cush drive spring
-
- Member
- Posts: 388
- Joined: Tue May 25, 2021 10:50 pm
- Location: Oxfordshire UK
1933 model 12 cush drive spring
Everyday’s a learning curve.
-
- Member
- Posts: 388
- Joined: Tue May 25, 2021 10:50 pm
- Location: Oxfordshire UK
Re: 1933 model 12 cush drive spring
I think it should look like this
You do not have the required permissions to view the files attached to this post.
Everyday’s a learning curve.
-
- Member
- Posts: 8587
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: 1933 model 12 cush drive spring
I've really no idea but if it's of any help there's an illustration (Pt. No. 569) on page 8 and listed on page 14 in the Spares List here:
http://archives.jampot.dk/book/Spares_l ... s_List.pdf
http://archives.jampot.dk/book/Spares_l ... s_List.pdf
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'