Hi, I have the engine stripped down, but don't want to split the crankcases unnecessarily. The two crankcase bearings feel fine, but I don't know how to check for any big end wear by holding the con rod. Can anybody help me on this ?
Cheers,
John
1960 G5 Big End
-
- Member
- Posts: 32
- Joined: Sun Mar 29, 2020 11:37 am
- Location: Hertfordshire UK
- dave16mct
- Member
- Posts: 3246
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: 1960 G5 Big End
Take a good hold of it and see if there's any up and down play (not sideplay)
Dave..
Dave..
-
- Member
- Posts: 32
- Joined: Sun Mar 29, 2020 11:37 am
- Location: Hertfordshire UK
Re: 1960 G5 Big End
Thanks Dave ..... obvious I suppose and I don't think there's any up and down movement, just a bit of waggle side to side.
Cheers,
John
Cheers,
John