Page 2 of 2

Re: Rear number Plate/light holder

Posted: Thu May 14, 2020 11:00 pm
by les ward
I guess a previous owner drilled it for some reason. Some of the other holes have been enlarged, so it will need a bit of work, but not a lot.

Re: Rear number Plate/light holder

Posted: Thu May 14, 2020 11:16 pm
by alanengineer
These dont come up often and this is relatively simple to restore, Say , yes please

Re: Rear number Plate/light holder

Posted: Thu May 14, 2020 11:24 pm
by Peter Morris
My old G5 didn't have the hole, easy job to get the hole filed if it shouldn't be there

Re: Rear number Plate/light holder

Posted: Fri May 15, 2020 7:50 am
by spotpaul
Hi Les, please email the price and I'll get in touch.
Best Regards,
Terry.

Re: Rear number Plate/light holder

Posted: Fri May 15, 2020 8:29 am
by ajscomboman
As the others have said the hole shouldn't be there and the lamp unit fixing holes have been enlarged but ignore that as simple to fill. The tinware on all these bikes and even H/W's nowadays that anything that comes up that is half decent should be snapped up.

Re: Rear number Plate/light holder

Posted: Fri May 15, 2020 8:56 am
by spotpaul
Yeah, comboman, seems to be the case. Just waiting for Les to get back.
Thanks everyone for the input.
Terry

Re: Rear number Plate/light holder

Posted: Fri May 15, 2020 8:17 pm
by clive
Have not been keeping my eye on this thread, been too busy decorating the extension :headbang: . In future Terry can you place this sort of thread in the wanted section of the forum http://www.jampot.com/forum/viewforum.php?f=59 then I don't have to moderate it, although in fairness everyone has been quite well behaved, even comboman :shock: . Hope the part suits. Thanks Adverts Editor

Re: Rear number Plate/light holder

Posted: Fri May 15, 2020 8:24 pm
by spotpaul
Sorry about this but it appears I am on the wrong forum to ask for parts. I'm new to the site and apologise.
Thanks for the indulgence.
Terry.

Re: Rear number Plate/light holder

Posted: Sat May 16, 2020 12:08 pm
by ajscomboman
clive wrote:Have not been keeping my eye on this thread, been too busy decorating the extension :headbang: . In future Terry can you place this sort of thread in the wanted section of the forum http://www.jampot.com/forum/viewforum.php?f=59 then I don't have to moderate it, although in fairness everyone has been quite well behaved, even comboman :shock: . Hope the part suits. Thanks Adverts Editor

I thought that I was very good as well not mentioning my centrestands!!! :rofl: :rofl:

Re: Rear number Plate/light holder

Posted: Sat May 16, 2020 5:44 pm
by clive
ajscomboman wrote:
clive wrote:Have not been keeping my eye on this thread, been too busy decorating the extension :headbang: . In future Terry can you place this sort of thread in the wanted section of the forum http://www.jampot.com/forum/viewforum.php?f=59 then I don't have to moderate it, although in fairness everyone has been quite well behaved, even comboman :shock: . Hope the part suits. Thanks Adverts Editor

I thought that I was very good as well not mentioning my centrestands!!! :rofl: :rofl:
So they fit lightweights too do they?

PS don't answer this as it would constitute an advert :headbang: