Page 1 of 1
Wheel bearing removal query
Posted: Sat Nov 16, 2019 3:43 am
by asterysk_usa
Just wanted to double check that the bearing gets pressed out away from the threaded end i.e. away from this side.
Also , is there a maintenance manual that explains this more in depth maintenance ?
Sent from my iPhone using Tapatalk
Re: Wheel bearing removal query
Posted: Sat Nov 16, 2019 6:54 am
by Mick D
Hi
Download the 57 - 64 Workshop manual from the archive, pretty sure your wheel bearings are the same - see page 65.
http://archives.jampot.dk/book/Workshop ... models.pdf
Regards Mick
Re: Wheel bearing removal query
Posted: Sat Nov 16, 2019 8:38 am
by asterysk_usa
Hadn't thought to look at a different year, many thx. This is extremely useful
Re: Wheel bearing removal query
Posted: Sun Nov 17, 2019 2:49 pm
by gotoole
These files might be useful
Ajs_AMC_Service_Sheet_503_Dismantling_and_rebuilding_full-width_spring_frame_rear_wheel_hubs.pdf
ajs_amc_service_sheet_502_wheel_bearing_adjustment.pdf
Make sure you check the orientation of the oil seal cup washer on the Speedo side. See
Correct&IncorrectRearwheel.pdf
Re: Wheel bearing removal query
Posted: Sun Nov 17, 2019 6:06 pm
by asterysk_usa
gotoole wrote:These files might be useful
Ajs_AMC_Service_Sheet_503_Dismantling_and_rebuilding_full-width_spring_frame_rear_wheel_hubs.pdf
ajs_amc_service_sheet_502_wheel_bearing_adjustment.pdf
Make sure you check the orientation of the oil seal cup washer on the Speedo side. See
Correct&IncorrectRearwheel.pdf
extremely useful documents, thankyou