CSR Fork Shroud Rubber Washer

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
Member
User avatar
Posts: 323
Joined: Sun Mar 18, 2018 12:02 pm
Location: Bristol UK

CSR Fork Shroud Rubber Washer

Postby Martin.S » Wed Jun 12, 2019 6:47 pm

Is anyone able to tell me where abouts the CSR fork shroud rubber washer fits (018216)?
Cheers

Member
User avatar
Posts: 323
Joined: Sun Mar 18, 2018 12:02 pm
Location: Bristol UK

Re: CSR Fork Shroud Rubber Washer

Postby Martin.S » Thu Jun 13, 2019 8:01 pm

Found this in an earlier post from Rangey :-
Ok you need to be looking at an illustration that shows 1-1/8" forks. The bottom chrome housing ring 018215 ( X2) has the rubber ring inside it and the fork cover with the headlamp bracket (lug) sits into it so when you tighten the upper yolk down it holds the headlamp brackets ( lug) tight. The top cover is part no 010703 and is different to the bottom chrome ring 018215 so you need two. The headlamp bracket tube fits into this


But if you look in the picture below the rubber washer is under the bottom chrome cap - it could also possibly fit under the bottom yoke.

ClassicMechanicsPage53.jpg


But in the drawing below (off Ebay) it shows it as Rangey explained

s-l1600EBAY.jpg
You do not have the required permissions to view the files attached to this post.

Return to G2 / Model 14

Who is online

Users browsing this forum: No registered users and 5 guests