Re: G3LS AR UNIT
Posted: Fri Dec 28, 2018 11:36 pm
Guess minus the clip was the reason the AR unit did not tighten on the mag shaft.
Page 2 of 2
Re: G3LS AR UNIT
Posted: Sat Dec 29, 2018 5:27 am
Clip and disc. Both now on order. I've never come across so so many codges and alterations on one machine. There are too many to remember, let alone list.
Re: G3LS AR UNIT
Posted: Sat Dec 29, 2018 9:06 am
All those bits and bobs will now, or are now available from the parts service, all part of the overhaul that's currently being undertaken. Seems lots of parts are now readily out there but weren't being stocked for whatever reason.
Re: G3LS AR UNIT
Posted: Sat Dec 29, 2018 10:58 am
Well at least the mystery of why the AR unit will not tighten on the mag shaft should be resolved, when it gets all its bits in place. Guess they got lost? some time between when the bike last ran and the timing was done, which failed to happen due to lost bits. I do not think there is an illustrated parts list for the SR1 A/R unit. I got the pic's I posted, off e bay, so may not be quite correct for G3LS SR1 mag.