Matchless G3L - Teledraulic Fork Spacing Query

Information relating to the Matchless G3 or AJS Model 16 350cc Heavyweight
Member
User avatar
Posts: 2169
Joined: Mon Jan 01, 1990 12:00 am
Location: HAMPSHIRE UK

Re: Matchless G3L - Teledraulic Fork Spacing Query

Postby ajscomboman » Tue Dec 04, 2018 9:20 am

Mick D wrote:Thanks John

But as the bike in question should be fitted with 1 - 1/8" forks I don't think an 1 - 1/4" seal would fit into the slider let alone the smaller diameter recess in the slider extension.

PHenry

Are you trying to install a genuine AMC oil seal or have you measured the OD, (incorrectly, if the seal you have fits into the slider extension), and ID and source a seal of those dimensions?

Regards Mick


External OD of both seals are the same so are interchangeable. The bushings are the same only the ID's are different.

Member
Posts: 16
Joined: Mon Jun 04, 2018 6:22 pm
Location: Tamil Nadu INDIA

Re: Matchless G3L - Teledraulic Fork Spacing Query

Postby phenry » Sat Dec 08, 2018 7:08 pm

Thanks for all the advice.
Looks like I have been doing it wrong all this while. I was using the right ID but the wrong OD. The OD was such that it was a fit inside the fork slider.
I never thought about the Gap between the fiber bush and the slider.
Just to show what I was doing I have attached a pic
You do not have the required permissions to view the files attached to this post.

Previous

Return to G3 / Model 16

Who is online

Users browsing this forum: Google [Bot] and 10 guests