Model 14

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
User avatar
Posts: 2169
Joined: Mon Jan 01, 1990 12:00 am

Re: Model 14

Postby ajscomboman » Mon Dec 03, 2018 12:55 pm

shifter wrote:I have snooped/asked around and will continue to do so at getting a batch made to no avail up to now. Unfortunately foundry's and the like are few and far up this end

Same down in the south, however the thought occurred that maybe more a hobbyist manufacturer may look at these, people that produce items in museums etc. I'll keep snooping as well.

Posts: 14
Joined: Fri Nov 26, 2010 11:52 am

Re: Model 14

Postby borrop01 » Thu Dec 06, 2018 4:32 pm

Hi, I had the same problem in finding a good spline centre. For kickstart shaft. I purchased a similar sized new spline shaft off eBay but with straight shaft. Cut the new spline boss off and welded it to
My cranked origional kickstart shaft. Works fine.

Posts: 1831
Joined: Wed Oct 12, 2005 9:45 pm
Location: N YORKS UK

Re: Model 14

Postby 56G80S » Sat Dec 08, 2018 1:34 pm

I also had our local blacksmith weld the top from one kickstart with poor splines onto another with good splines.

It's been working a treat.

It was stick welding using a high chrome content rod.

Johnny B

Posts: 10
Joined: Fri Sep 07, 2018 7:56 pm
Location: United Kingdom

Re: Model 14

Postby Woodland » Mon Dec 10, 2018 7:40 pm

I'm looking for a kickstarter for a G2, like mentioned very hard to get hold of, if someone could get them made I would be happy to pay upfront


Return to G2 / Model 14

Who is online

Users browsing this forum: No registered users and 9 guests