Page 7 of 16

Re: 1957 M16 not running properly

Posted: Sun Nov 18, 2018 3:58 pm
by Pharisee
Draganfly have these in stock. I think they are for the Ariel Colt but I also believe that they were used on the AMC machines as well. Might be worth looking at the photo...

https://www.draganfly.co.uk/index.php/t ... _pathway-2

https://www.draganfly.co.uk/media/com_h ... /S2636.jpg

Re: 1957 M16 not running properly

Posted: Sun Nov 18, 2018 4:07 pm
by spookefoote1956
I think someone was asking about these the other week. I remember them saying they were an outrageous price and I directed them towards draganfly. They're pretty good if you ring them up regarding compatibility. After all more often than not they're going in a Joey unit.

Re: 1957 M16 not running properly

Posted: Sun Nov 18, 2018 4:22 pm
by Plugsnpoints
Thanks for that. It's much appreciated :)

Re: 1957 M16 not running properly

Posted: Sun Nov 18, 2018 5:32 pm
by alanengineer
Do they look the same as yours, are they not lightweight ones

Re: 1957 M16 not running properly

Posted: Sun Nov 18, 2018 6:02 pm
by Plugsnpoints
I honestly don't know if they are lightweight ones. Any help would be much appreciated in finding the correct item that I need. Thank you :)

Re: 1957 M16 not running properly

Posted: Sun Nov 18, 2018 6:08 pm
by spookefoote1956
Phone this number tomorrow and talk to the nice chaps at draganfly. Tell them what dizzy / mag it's going in. They will know
01986 894798

Cheers, Chris

Re: 1957 M16 not running properly

Posted: Sun Nov 18, 2018 6:27 pm
by Plugsnpoints
Thanks Chris. I will do :)

Re: 1957 M16 not running properly

Posted: Sun Nov 18, 2018 6:48 pm
by Mick D
Hi Andrew

You say you have an alternator late 57 engine

If you check the 58 parts list in the archive you will see:
CB Parts.png
If you need more detail, go to page G3 in the Lucas Complete list:
Lucas CB.png
Regards Mick

Re: 1957 M16 not running properly

Posted: Sun Nov 18, 2018 6:52 pm
by spookefoote1956
Alernatively you could fit the plaything of beelzebub! However my money's on draganfly
https://www.ebay.co.uk/itm/CLASSIC-BIKE ... rk:11:pf:0

Re: 1957 M16 not running properly

Posted: Sun Nov 18, 2018 7:00 pm
by Plugsnpoints
Ha ha! Love it! I might have to consider this if I can't find the bobweight thingy. What I also need to know is where to plug my OBD2 computer into...