Matchless G3L - Teledraulic Forks (Slider Extensions)

Information relating to the Matchless G3 or AJS Model 16 350cc Heavyweight
Member
Posts: 12
Joined: Mon Jun 04, 2018 6:22 pm
Location: Tamil Nadu INDIA

Matchless G3L - Teledraulic Forks (Slider Extensions)

Postby phenry » Sun Nov 04, 2018 6:44 pm

Greetings!

Working on the Teledraulics today and looks like the Slider Extensions are short of length. The previous owner just cut off a portion of it for reasons unknown.
I was wondering if I could make a replica of this as the design looks simple.

The question is
(1) Is this one complete part machined from a lathe
(2) Is this a 2 piece part, one being the hollow pipe and the other a threaded part, machined from a lathe and then welded together. Please advice

Also the threads on the fork legs are badly worn out. Can this be re-threaded?

Any advice will be extremely helpful.

Regards
PHenry

Member
Posts: 5582
Joined: Wed Sep 01, 2004 12:00 am
Location: WEST SUSSEX UK

Re: Matchless G3L - Teledraulic Forks (Slider Extensions)

Postby SPRIDDLER » Sun Nov 04, 2018 6:53 pm

Well, since I just happen to be online........
A frugal pal (g80csp11) is at this moment making a pair for his G15CSR. It seems that new ones are about $150 Plus shipping (and probably import duty) and only currently available from the U.S.A.
He has used stainless tubing of exactly the correct size. The threaded part on the old ones is an insert which he proposes to part off in a lathe and silver solder them into the new stainless tubes.
He may be along later with more detail.
Can't help with restoring the threads in the fork legs I'm afraid. (I assume you mean the aluminium sliders).
I poke badgers with spoons.

Member
Posts: 933
Joined: Mon Mar 24, 2014 5:44 pm
Location: Aberdeenshire

Re: Matchless G3L - Teledraulic Forks (Slider Extensions)

Postby Mick D » Sun Nov 04, 2018 7:06 pm

Hi

Blimey| When I did my restoration a year or so ago slider extensions were readily available for around £40 - how times change.

They are a two piece construction, (welded together).

I wouldn't be too anal about the slider threads, the fork springs will tend to keep the slider extensions in contact with the sliders, just don't torque them up too tight and risk further damage to the sliders.

Regards Mick

Member
User avatar
Posts: 492
Joined: Tue Mar 15, 2016 8:51 pm
Location: Bedfordshire, UK

Re: Matchless G3L - Teledraulic Forks (Slider Extensions)

Postby Pharisee » Sun Nov 04, 2018 7:53 pm

You don't say whether your forks are the early 1.1/8" or the later 1.1/4" stanchions but when I refurbished my early ones, I bought a pair of stainless slider extensions from the club spares (Part No. 018161). When I bought them, they were £57 a pair but it seem that the price for the ones in stock now are £78 +VAT

Return to G3 / Model 16

Who is online

Users browsing this forum: No registered users and 4 guests