no oil returning to the tank

Information relating to the Matchless G80 or AJS Model 18 500cc Heavyweight.
Member
Posts: 775
Joined: Mon Jan 01, 1990 12:00 am
Location: WEST SUSSEX UK

Re: no oil returning to the tank

Postby g80csp11 » Thu Nov 08, 2018 11:00 pm

if you are close to Russell Motors in Clapham junction , its easy by train and just next to the station
by appointment Les will do the crank and bush while you go for a cup of tea

Member
Posts: 933
Joined: Mon Mar 24, 2014 5:44 pm
Location: Aberdeenshire

Re: no oil returning to the tank

Postby Mick D » Fri Nov 09, 2018 8:33 am

Hi

Sorry to sound like the harbinger of doom, but the flywheel shafts are, by design, press fits in the wheels, you say the drive side shaft is now loose which indicates damage to the shaft and or the wheel. This damage will have created a misalignment of the crankpin to the con rod and hence my concern over the state of the big end, (you will probably get away with the small end). With the drive side loose, the timing side bush well worn and the oil pump drive broken it's possible that the timing gears have been under undue pressure, check them carefully.

I don't know if oversized shafts are available but that may be an option to repair the damage on the drive side.

Regards Mick

Member
Posts: 5582
Joined: Wed Sep 01, 2004 12:00 am
Location: WEST SUSSEX UK

Re: no oil returning to the tank

Postby SPRIDDLER » Fri Nov 09, 2018 10:00 am

g80csp11 wrote:if you are close to Russell Motors in Clapham junction , its easy by train and just next to the station
by appointment Les will do the crank and bush while you go for a cup of tea


Les supplied and fitted a new big end and drive side axle for my single and replaced the con rod as on mine the big end eye was oval.
All done exactly as Peter said, whilst I went for a brew.
He uses the original factory tooling which he and his dad rescued ('and several vanloads of parts') from the Plumstead factory when it was cleared out.
I poke badgers with spoons.

Member
Posts: 52
Joined: Mon Nov 16, 2015 6:08 pm
Location: east sussex

Re: no oil returning to the tank

Postby willowbedone » Fri Nov 09, 2018 2:59 pm

Thanks for all helpful advice I've discovered that the drive side flywheel is well worn and will need replacing I have contacted Ken De-groome who has all the parts to repair it .So it's off to Ken crankcases as well and will come back sorted :P :P

Member
User avatar
Posts: 3157
Joined: Mon Jan 01, 1990 12:00 am
Location: LONDON UK

Re: no oil returning to the tank

Postby clive » Fri Nov 09, 2018 4:22 pm

Does this mean I can delete your wanted ad then? Adverts Editor
clive
if it ain't broke don't fix

Member
User avatar
Posts: 807
Joined: Sat Jun 20, 2015 8:38 am
Location: Chester, UK

Re: no oil returning to the tank

Postby clanger9 » Fri Nov 09, 2018 5:39 pm

Sounds good! Glad to hear you've found the parts you need.
Ken will do a top quality job, it'll be as good as new once you get it back. :beer:
1966 AJS Model 14 250 CSR "cafe racer"
1993 Ducati 750SS

Member
Posts: 52
Joined: Mon Nov 16, 2015 6:08 pm
Location: east sussex

Re: no oil returning to the tank

Postby willowbedone » Fri Nov 09, 2018 8:40 pm

Yes all good I find it sad though that there are not many firms / people left who can carry out this type of technical work
Maybe I'm getting old

Member
Posts: 52
Joined: Mon Nov 16, 2015 6:08 pm
Location: east sussex

Re: no oil returning to the tank

Postby willowbedone » Wed Nov 14, 2018 5:11 pm

All good delivered crank and cases to Mr Ken De-Groome .Ken dismantled the crank whilst I was there the only part salvageable is the con rod ! crank pin and axle nuts were not very tight resulting in wear to flywheels Ken has sorted flywheels axles And I ordered a new big whilst there. I was very impressed with Ken's knowledge and his skills
It's good to know that when I collect the crank that all will be perfect :D

Previous

Return to G80 / Model 18

Who is online

Users browsing this forum: Majestic-12 [Bot] and 11 guests