Page 1 of 3
Engine Rebuilt - Help
Posted: Thu Jul 19, 2018 9:52 am
by dada
We are rebuilding an engine Model 14 I ordered main bearing from Spares website but they send me AMC17 I think it is of 350cc as bigger any suggestions
Re: Engine Rebuilt - Help
Posted: Thu Jul 19, 2018 5:15 pm
by clanger9
If you are referring to the big-end bearing, then yes there are at least 4 different combinations of con rod & bearing depending on the model year. Late CSRs and 350 need the big one.
Details here:
http://archives.jampot.dk/book/Spares_l ... o_1966.pdf (look under FLYWHEELS)
Re: Engine Rebuilt - Help
Posted: Tue Jul 24, 2018 3:48 pm
by dada
Mine is 250cc 1962. Should AJS M14 work
Re: Engine Rebuilt - Help
Posted: Tue Jul 24, 2018 3:49 pm
by dada
Any idea who sell them ?
Re: Engine Rebuilt - Help
Posted: Tue Jul 24, 2018 7:18 pm
by clanger9
Try Alpha Bearings or Russell Motors (telephone only, they don't check emails)
Re: Engine Rebuilt - Help
Posted: Thu Jul 26, 2018 7:37 am
by dada
Bearing Sorted it is coming up nicely.
Noticed I have some items missing to complete rebuild such as shaft keys etc. any ideas from where I should try my luck
Re: Engine Rebuilt - Help
Posted: Thu Jul 26, 2018 7:56 am
by clanger9
Looking good! For the keys, try AMC Classic Spares.
Re: Engine Rebuilt - Help
Posted: Thu Jul 26, 2018 3:22 pm
by dada
Hi, anyone else that can assist as they are closed atm. Thanks
Re: Engine Rebuilt - Help
Posted: Wed Aug 01, 2018 8:55 am
by dada
Machining parts ourself, I am lucky to have my father as engineer
Re: Engine Rebuilt - Help
Posted: Thu Aug 02, 2018 10:11 pm
by dada
Parts Resprayed
