g2 oil change

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
Member
Posts: 15
Joined: Sat Dec 03, 2016 8:09 pm
Location: Derbyshire UK

g2 oil change

Postby dunsweepin » Thu Jul 05, 2018 7:23 pm

1966 g2 csr,changing engine oil and cleaning filter.i have fibre washers on both drain plugs is this correct ?
D G SIMS

Member
Posts: 34
Joined: Wed Feb 07, 2018 12:02 am
Location: Essex

Re: g2 oil change

Postby ChrisTheChippy » Thu Jul 05, 2018 8:48 pm

Hi ,
As far as I'm aware that is correct as I have fibre washers on both drain plugs on my matchless G2 plus fibre washer on oil filter . Hope that helps.
Regards Chris

Member
Posts: 15
Joined: Sat Dec 03, 2016 8:09 pm
Location: Derbyshire UK

Re: g2 oil change

Postby dunsweepin » Fri Jul 06, 2018 6:43 am

cheers chris for that although my oil filter has a copper washer.i suppose if it seals its ok to use either ,dave
D G SIMS

Member
Posts: 15
Joined: Sat Dec 03, 2016 8:09 pm
Location: Derbyshire UK

Re: g2 oil change

Postby dunsweepin » Sat Jul 07, 2018 5:19 pm

cheers for both replys lads,there is also a recess at the base of one drain plug,should it have an o ring fitted.
D G SIMS

Member
User avatar
Posts: 2421
Joined: Wed Dec 14, 2011 1:02 am
Location: ESSEX UK

Re: g2 oil change

Postby Ozmadman » Sat Jul 07, 2018 6:46 pm

dunsweepin wrote:cheers for both replys lads,there is also a recess at the base of one drain plug,should it have an o ring fitted.

No o ring is fitted. Just a fibre Washer that is a sloppy fit as the thread is wider than the part of the plug where the was washer goes
Paul
1960 Model 8
1974 Yamaha RD250B US Model 6 speed

Member
Posts: 15
Joined: Sat Dec 03, 2016 8:09 pm
Location: Derbyshire UK

Re: g2 oil change

Postby dunsweepin » Sun Jul 08, 2018 7:10 am

cheers oz,i am learning a little more every day
D G SIMS

Return to G2 / Model 14

Who is online

Users browsing this forum: No registered users and 5 guests