AJS & Matchless Owners Club

Rob Harknett wrote:

G15 Roy wrote:

Rob Harknett wrote:I would have thought it to be 26 tpi cycle thread. 023250 seems to be another part not used on earlier models.

But what about 000292 you sad you could provide the size

Listed by the club Roy but stocks limited. its 5/8" I see this is a half nut, so a bit special.

Ashampoo_Snap_2018.06.07_18h33m07s_001_.png

So they only stock them in Stainless

But limited Roy. Strange that stud and nut seems hard to locate.

thanks for all the replies ,
have sourced the required nuts from AMC Classics.
it was the 000292 as listed ,5/8" Cycle thread 20TPI. its the same thread as spindle nut but only a half nut to allow seat fitment .