Information relating to the Matchless G3 or AJS Model 16 350cc Heavyweight
Posts: 2895
Joined: Sun Jan 01, 1995 12:00 am
Location: ESSEX UK

Re: G3 AFS

Postby G15 Roy » Thu Jun 07, 2018 6:04 pm

Rob Harknett wrote:
G15 Roy wrote:
Rob Harknett wrote:I would have thought it to be 26 tpi cycle thread. 023250 seems to be another part not used on earlier models.

But what about 000292 you sad you could provide the size

Listed by the club Roy but stocks limited. its 5/8" I see this is a half nut, so a bit special.

So they only stock them in Stainless

User avatar
Posts: 9783
Joined: Mon Jan 01, 1990 12:00 am
Location: ESSEX UK

Re: G3 AFS

Postby Rob Harknett » Thu Jun 07, 2018 7:03 pm

But limited Roy. Strange that stud and nut seems hard to locate.

Posts: 18
Joined: Tue Mar 27, 2018 1:52 pm
Location: Essex

Re: G3 AFS

Postby daz3226 » Wed Jun 13, 2018 12:41 pm

thanks for all the replies ,
have sourced the required nuts from AMC Classics.
it was the 000292 as listed ,5/8" Cycle thread 20TPI. its the same thread as spindle nut but only a half nut to allow seat fitment .


Return to G3 / Model 16

Who is online

Users browsing this forum: No registered users and 3 guests