AJS M14 Wheel Bearings
Posted: Thu Mar 22, 2018 8:36 pm
Removing the bearings from both the front and rear wheel hubs is there any advice on the best way to do this ?
Many thanks
Many thanks
AJS & Matchless Owners Club forum
https://forum.jampot.com/
Fronts are the same just plain rollers which tap out and inclanger9 wrote:Rear bearings are easy - just whack the axle shaft out from either side with a copper mallet. The bearings are just plain ball rollers. Tap the new ones home carefully with a suitable sized socket; the machined step on the axle keeps the spacing exactly right.
I can't comment on the front bearings as my bike has a Bridgestone front hub.