Page 3 of 3
Re: Gearbox oil level
Posted: Fri Oct 27, 2017 6:29 pm
by pecon
Will do Paul. Had a chat with various suppliers and was told that the same kickstart was used on the Norton Jubilee and Navigator. Also read that some Francis Barnetts may have had a similar spline, so some more possibilities there. Someone suggested drilling through the shaft and lever and putting a pin in but I think that drilling hardened steel is beyond me.
Peter
Re: Gearbox oil level
Posted: Sat Oct 28, 2017 12:04 am
by Ozmadman
There's one here, maybe would be a good idea to ask the condition of the shaft first
https://www.ebay.co.uk/itm/AMC-lightwei ... SwnQ9ZyWoZ
another one but silly money!!
https://www.ebay.co.uk/itm/4-speed-Gear ... SwTQtZ7PsM
Re: Gearbox oil level
Posted: Sat Oct 28, 2017 10:49 am
by pecon
Hi Paul. Thanks for the links but the gearbox shaft is fine ( Not sure about the actual box though as I have yet to run it ) but all I need at the moment is the kickstart arm which has its splines stripped.
Peter
Re: Gearbox oil level
Posted: Sat Oct 28, 2017 3:45 pm
by Ozmadman
Sorry,thought the splines were damaged on the shaft, finding a kickstart lever shouldn't be too difficult