Hi everyone
I have a AJS model 20 1954, the carburetor Amal 76at/1ef is very poor is there other Amal carburetor I can use.
Best regards
Per
Carburetor
-
- Posts: 14
- Joined: Tue Apr 02, 2013 1:09 pm
- Location: DENMARK
- dave16mct
- Member
- Posts: 3248
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: Carburetor
You could use a 1" 376 monobloc and jet it as for the 1955 G9.
Dave.
Dave.
- dave16mct
- Member
- Posts: 3248
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: Carburetor
That is : 376/6 1" bore, 240 main jet , 30 pilot jet , No4 slide, centre notch needle setting, .1065 needle jet.
Dave
Dave
-
- Posts: 14
- Joined: Tue Apr 02, 2013 1:09 pm
- Location: DENMARK
Re: Carburetor
Hi Dave
I will try with the 376/6.
Thanks for the advice
Best regards
Per
I will try with the 376/6.
Thanks for the advice
Best regards
Per
-
- Posts: 22
- Joined: Wed Nov 05, 2014 11:40 am
- Location: Victoria AUSTRALIA
Re: Carburetor
How did you go jensendk?
I finally replaced my pre mono with the suggested carb and guess what?
Running like new
Thanks for the advise Dave.
Cheer to all.
I finally replaced my pre mono with the suggested carb and guess what?
Running like new
Thanks for the advise Dave.
Cheer to all.
-
- Posts: 14
- Joined: Tue Apr 02, 2013 1:09 pm
- Location: DENMARK
Re: Carburetor
Hi all
I put the monobloc on my model 20 and it make life Easier. It is running just perfect 😜🇩🇰
I put the monobloc on my model 20 and it make life Easier. It is running just perfect 😜🇩🇰