Just to ask if anyone knows if there should be a gasket where the external feed pipe to the cylinder head joins the crankcase; i.e between the flat plate through which the pipe goes; joined onto the crankcase by 4 screwe; and the crankcase itself?
There isn't one there at the moment and I can't see one in the recently bought gasket set I have; but I was just curious as there is a slight leak apparent.....
Many thanks,
Phil
G80 Top end oil feed query
-
- Posts: 36
- Joined: Mon May 14, 2007 10:26 pm
- Location: ISLE OF MAN UK
- Tony W
- Posts: 92
- Joined: Thu Jun 24, 2010 1:11 pm
- Location: LANCS UK
G80 Top end oil feed query
Yes part number 000582 one each end.
-
- Posts: 36
- Joined: Mon May 14, 2007 10:26 pm
- Location: ISLE OF MAN UK
G80 Top end oil feed query
Wow, that was a quick response!
Cheers,
Phil
Cheers,
Phil
-
- Member
- Posts: 1586
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WEST SUSSEX UK
G80 Top end oil feed query
make sure you line up the hole in the gasket