clutch actuating lever fouling g/box filler cap
-
- Member
- Posts: 21
- Joined: Fri Jul 14, 2006 9:00 am
- Location: WILSHIRE UK
Re: clutch actuating lever fouling g/box filler cap
I've finally solved the problem after weeks of frustration. The clutch actuation lever was 180 degrees out. The PO obviously did it, maybe to compensate for the wear in the old pushrod? Thanks to everyone for your help. It still needs putting back together.
-
- Member
- Posts: 241
- Joined: Mon Aug 16, 2021 3:11 pm
- Location: Isle Of Wight UK
Re: clutch actuating lever fouling g/box filler cap
Well done sorting it out, like most things once you find the answer you wonder how it took so long to find it. And the answer is usually right in front of you all the time.
-
- Member
- Posts: 21
- Joined: Fri Jul 14, 2006 9:00 am
- Location: WILSHIRE UK