G80 SpeedoTrip meter re-set

Trefor · Post by **Trefor** » Tue Mar 08, 2011 12:00 am

I have a G80 with the post 1955 Speedo in the head lamp shell. How and where does the re-set for the trip meter fit? I have searched in vain the old parts lists for cables and buttons and the head lamp shell for holes. Can somebody please enlighten me.

wilko · Post by **wilko** » Tue Mar 08, 2011 1:45 am

"55's have the rear hooded headlight which has a space underneath for the reset to protrude downwards. I'm relying on memory?

Rob Harknett · Post by **Rob Harknett** » Tue Mar 08, 2011 11:20 am

Look for a small spindle with a small hole in the shaft, on the bottom, you will need the long extended trip arm about 3" long. Fits on with a small clevis pin. If the spindle comes out the side, you've got the wrong speedo.

Trefor · Post by **Trefor** » Thu Mar 10, 2011 12:59 pm

Thanks for the help- it's right speedo and I've located the shaft. I just need to make up an extension to exit out of the shell with the wiring and speedo drive cable.