They had some when I ordered a couple of weeks ago. For info it transpires that the model 20 I'm working on has a 350 clutch basket with a 500 clutch centre, hence the extra plates wouldn't fit. I'm going to try it as is, as the owner wasn't complaining of any clutch slip.
Ian
B52 Clutch
-
- Posts: 307
- Joined: Fri May 21, 2010 5:05 am
- Location: FRANCE
-
- Member
- Posts: 2159
- Joined: Thu Jul 04, 2002 1:00 am
- Location: NORMANDIE FRANCE
B52 Clutch
So that's why you were having trouble in the beginning with a friction plate coming off the drum. Makes perfect sense now.
The next issue will be whether the pressure plate fouls the deep centre before the plates are well compressed - just guessing! But if it worked before . . .
Just so we know - did you happen to measure the bits you've got? Be really good to have definitive info after all this palaver.
And if it transpires that I have 2 spares of the 500 baskets in the box . . . you're welcome to one. Bit of clean-up on the raised bits would be good, as ever, but serviceable if they're the right size and you need/want one.
The next issue will be whether the pressure plate fouls the deep centre before the plates are well compressed - just guessing! But if it worked before . . .
Just so we know - did you happen to measure the bits you've got? Be really good to have definitive info after all this palaver.
And if it transpires that I have 2 spares of the 500 baskets in the box . . . you're welcome to one. Bit of clean-up on the raised bits would be good, as ever, but serviceable if they're the right size and you need/want one.
-
- Posts: 307
- Joined: Fri May 21, 2010 5:05 am
- Location: FRANCE
B52 Clutch
Hi Groily, thanks for the offer of a clutch basket. I'll see if this one works ok. I measured up the clutch plates from JSL. I don't remember the dimensions now but they came up slightly thinner than the ones already fitted. I think the friction plate came up at 0.179".
Cheers, Ian
Cheers, Ian