AJS Neck Bolt size
-
- Posts: 10
- Joined: Thu Jun 14, 2007 12:45 pm
- Location: FINLAND
AJS Neck Bolt size
Hello,
I am new on forum and hailing from Finland. And a proud owner of a 1952 500cc ghardtail AJS
Could somebody please give me a fast answer for the neck bolt size? 1" or 7/8.
I am not able to measure it right now, but I have a nice front end I could get.
cheers
Jussi
I am new on forum and hailing from Finland. And a proud owner of a 1952 500cc ghardtail AJS
Could somebody please give me a fast answer for the neck bolt size? 1" or 7/8.
I am not able to measure it right now, but I have a nice front end I could get.
cheers
Jussi
Wruuummm...
-
- Posts: 7721
- Joined: Tue Nov 22, 2005 6:01 pm
- Location: UK
AJS Neck Bolt size
chop is a dirty word here
what is a neck bolt?
what is a neck bolt?
-
- Posts: 10
- Joined: Thu Jun 14, 2007 12:45 pm
- Location: FINLAND
AJS Neck Bolt size
Oh, okay
neck bearing is the right word. Is it 1" or 7/8?
Sorry
Jussi
neck bearing is the right word. Is it 1" or 7/8?
Sorry
Jussi
Wruuummm...
-
- Member
- Posts: 8559
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
AJS Neck Bolt size
Now then, ITMA, a bit of entente cordiale required here.
Welcome Jussi.
Health Warning:
Contributing to the Forums can seriously embarrass you and others around you.
ITMA is extremely knowledgeable (along with others) and able to answer all your questions, he's just shy of exposing his naturally patient, considerate, liberal, open-minded and helpful charisma.
Stick with us and you'll see.
Welcome Jussi.
Health Warning:
Contributing to the Forums can seriously embarrass you and others around you.
ITMA is extremely knowledgeable (along with others) and able to answer all your questions, he's just shy of exposing his naturally patient, considerate, liberal, open-minded and helpful charisma.
Stick with us and you'll see.
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
-
- Posts: 10
- Joined: Thu Jun 14, 2007 12:45 pm
- Location: FINLAND
AJS Neck Bolt size
Heh,
Nice Cheers mate! Now I really could use info. As english is not my native language, i finally came up ( probably ) with the righjt word: stern? So is it 1" or 7/8 or 13/16 ??? I really thye info asap.
Nice Cheers mate! Now I really could use info. As english is not my native language, i finally came up ( probably ) with the righjt word: stern? So is it 1" or 7/8 or 13/16 ??? I really thye info asap.
Wruuummm...
-
- Posts: 7721
- Joined: Tue Nov 22, 2005 6:01 pm
- Location: UK
AJS Neck Bolt size
I assume you are now talking about the steering stem that attahes the forks to the frame? They are all the same size, but there are two sizes of fork leg,but they will all fit any frame, its wheels and brakes that are different,
I don`t have one here to measure exactly sorry, likeliest 1"
I don`t have one here to measure exactly sorry, likeliest 1"
- Biscuit
- Deceased
- Posts: 3924
- Joined: Thu Jan 01, 1998 12:00 am
- Location: KENT UK
AJS Neck Bolt size
Hi Jussi (same name as one of my favourite tenors) Didn't know they were all the same size or I would have answered before, if they are as the Wiltshire Wizard says, then the thread is 1"x 26TPI.
Incidentally, 'Rigid' not 'Hardtail' only Don is allowed Americanisms.
Happy screwing!!Edited by - Biscuit on 14 Jun 2007 3:27:16 PM
Incidentally, 'Rigid' not 'Hardtail' only Don is allowed Americanisms.
Happy screwing!!Edited by - Biscuit on 14 Jun 2007 3:27:16 PM
-
- Posts: 7721
- Joined: Tue Nov 22, 2005 6:01 pm
- Location: UK
AJS Neck Bolt size
Rule one Jussi, never trust an "expert"!!!
and we are assuming the nice front end is an AMC one?
The demon Alan has sown doubt in my mind now
I`m sure they are all the same size stem, but its always wise to double check, in any case all the teledraulic forks will fit any Matchless/AJS which which originally mounted teledraulics, or girder forks.
No chops here please unless pork or lamb,
Spriddler will settle for cat cutlets, stuffed
and we are assuming the nice front end is an AMC one?
The demon Alan has sown doubt in my mind now
I`m sure they are all the same size stem, but its always wise to double check, in any case all the teledraulic forks will fit any Matchless/AJS which which originally mounted teledraulics, or girder forks.
No chops here please unless pork or lamb,
Spriddler will settle for cat cutlets, stuffed
-
- Member
- Posts: 8559
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
AJS Neck Bolt size
quote:
Spriddler will settle for cat cutlets, stuffed
I'm always up for a pussyburger with a nice bun.
Spriddler will settle for cat cutlets, stuffed
I'm always up for a pussyburger with a nice bun.
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
-
- Posts: 10
- Joined: Thu Jun 14, 2007 12:45 pm
- Location: FINLAND