4 on ebay at the mo
http://cgi.ebay.co.uk/SPEEDO-DRIVE-3-5T ... dZViewItem
Made in India.
See ya all at the Jampot spares open day.
Chris.Edited by - griffin on 08 Jun 2007 2:44:42 PM
Speedo gearbox wanted
- griffin
- Member
- Posts: 207
- Joined: Thu Jan 01, 1998 12:00 am
- Location: NOTTINGHAMSHIRE UK
- TommoT
- Member
- Posts: 1602
- Joined: Mon Jan 01, 1990 12:00 am
- Location: DENMARK
Speedo gearbox wanted
Thanks all, got hold of one here in DK, from honourable member minajs, who had one spare from a previous rebuild!
Great stuff!
NB: may not make it to Jampot Spares Open Day, but reserve a set of twin bearing thrust washers and a G9 crankshaft for me!
Great stuff!
NB: may not make it to Jampot Spares Open Day, but reserve a set of twin bearing thrust washers and a G9 crankshaft for me!
TommoT
Ride Your Motorcycle As If Your Life Depended On It - Cos' It Does!
Ride Your Motorcycle As If Your Life Depended On It - Cos' It Does!
-
- Member
- Posts: 2882
- Joined: Mon Jan 01, 1990 12:00 am
- Location: USA USA
Speedo gearbox wanted
Sorry, TommoT. I may have the world's supply of those in AMadden's Cave.
I have a few sets of good used thrust bearing sets & a good pre-57 crankshaft for sale. It is at standard size & looks good but polishing the jounals may reveal a need to re-grind.
The bare crankshaft weighs 24.5lb, but securly packed in double boxes is 29lb. Costly shipping from California to anywhere in the Real World. A countryman of yours is also interested & in a twin engine, but finds the cost of shipping an engine high.
He has asked about the crankshaft, too, but not decided, but he gets first refusal.
If you are interested, (or anyone else), send a PM.
Cheers, Don.
I have a few sets of good used thrust bearing sets & a good pre-57 crankshaft for sale. It is at standard size & looks good but polishing the jounals may reveal a need to re-grind.
The bare crankshaft weighs 24.5lb, but securly packed in double boxes is 29lb. Costly shipping from California to anywhere in the Real World. A countryman of yours is also interested & in a twin engine, but finds the cost of shipping an engine high.
He has asked about the crankshaft, too, but not decided, but he gets first refusal.
If you are interested, (or anyone else), send a PM.
Cheers, Don.