speedo drive on Q/D wheel
-
jerry
- Member
- Posts: 21
- Joined: Fri Jul 14, 2006 9:00 am
- Location: WILSHIRE UK
speedo drive on Q/D wheel
is this speedo drive the correct size? It's blocking the access holes for the Q/D wheel. Any answers please? Thanks.
You do not have the required permissions to view the files attached to this post.
-
Duncan
- Member
- Posts: 2141
- Joined: Thu Jul 10, 2003 1:00 am
- Location: HAMPSHIRE UK
Re: speedo drive on Q/D wheel
Hi Jerry, if your bike is a G3LWO it would have originally had a front wheel speedo drive however the rear bearing lock ring could be modified to take a rear wheel speedo drive ( see page 35 https://www.jampot.com/archives%5CAJS%2 ... Manual.pdf ), the G3L will have had a rear wheel speedo drive. However I believe that you will find nuts and lock/tab washers inside the hub that means it is not QD.
-
jerry
- Member
- Posts: 21
- Joined: Fri Jul 14, 2006 9:00 am
- Location: WILSHIRE UK
Re: speedo drive on Q/D wheel
Thanks very much Duncan for explaining that. I saw the holes and assumed rather than checking
. The BMS manual makes it all clear. I thought I had found another bodge!
. The BMS manual makes it all clear. I thought I had found another bodge!