Hi All
New owner here , recently purchased a late 1966 G3 with Norton front shocks and I assume matching rear shocks, the suspension is quite hard, can I adjust the rear to soften the ride?
Thanks
1966 rear shocks
-
- Member
- Posts: 23
- Joined: Sun Jun 25, 2023 10:43 pm
- Location: Monmouthshire UK
- Duncan
- Member
- Posts: 2141
- Joined: Thu Jul 10, 2003 1:00 am
- Location: HAMPSHIRE UK
Re: 1966 rear shocks
There should be a collar under the spring shrouds with what roughly looks like three steps in it that sits on an oval register on the shock body, use a suitable C spanner to rotate the collar to select one with less preload on the spring, adjust both to the same position.
If you have Hagon shocks the collar will enclose the register and steps making them hard to see.
If you have Hagon shocks the collar will enclose the register and steps making them hard to see.
-
- Member
- Posts: 23
- Joined: Sun Jun 25, 2023 10:43 pm
- Location: Monmouthshire UK
Re: 1966 rear shocks
Thank you , I think they are Girling shocks, so reading I can adjust the preload but not the spring rate , I guess if I want a softer ride I will need to replace the shocks
- Duncan
- Member
- Posts: 2141
- Joined: Thu Jul 10, 2003 1:00 am
- Location: HAMPSHIRE UK
Re: 1966 rear shocks
Springs can be changed if you desire, there is a file on the Archive that gives spring colour codes and rates, although buying new is simpler, as you don't have the AMC casting on the end new shocks are readily available, NJB or Hagon will tailor springs to suit the customers requirements.
-
- Member
- Posts: 23
- Joined: Sun Jun 25, 2023 10:43 pm
- Location: Monmouthshire UK
Re: 1966 rear shocks
Great thanks , I will check the archive