primary case spacers
- Stevecampy
- Member
- Posts: 42
- Joined: Sat Sep 25, 2021 6:39 pm
- Location: Lincolnshire UK
primary case spacers
Hi does the 18 s 1957 have a spacer on the center bolt of the primary case inside the case Thanks.If so what part number am i looking for.All I have is a spacer at the back no washers or spacers at all in the case Thanks
-
- Member
- Posts: 8567
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: primary case spacers
There's only part no: 021230 'Nut - wide for centre bolt inside chaincase'. See page 32 of the spares list here:
http://archives.jampot.dk/book/Spares_l ... ingles.pdf
It's quite normal to add a washer or two (by trial and error) after the wide nut to prevent the chaincase outer from crushing too far when the outer nut is tightened - especially if you have fitted the new (and wider) club seal.
http://archives.jampot.dk/book/Spares_l ... ingles.pdf
It's quite normal to add a washer or two (by trial and error) after the wide nut to prevent the chaincase outer from crushing too far when the outer nut is tightened - especially if you have fitted the new (and wider) club seal.
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
- Stevecampy
- Member
- Posts: 42
- Joined: Sat Sep 25, 2021 6:39 pm
- Location: Lincolnshire UK
Re: primary case spacers
Thank you