Hey folks,
I'm wondering if anyone can point me to documentation, or just know about where the center stand is to be anchored? It seems obvious but apparently not enough for me to figure out. Also, is my confusion a result of a damaged spring on here or should the hook be bent inwards ?
and just for reference here is what I have:
Thanks!
center stand spring anchor points?
- cfaber
- Posts: 346
- Joined: Mon Nov 20, 2017 5:37 am
- Location: USA, Colorado
- Contact:
center stand spring anchor points?
Fix it until it's broken!
Otherwise how will
anything get done?
Otherwise how will
anything get done?
-
- Posts: 2884
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: center stand spring anchor points?
Hi
The spring looks to be correct - the short hook in the first photo goes through a convenient hole in the RH rear engine plate.
I'd add an image but it looks like the server needs attention - I'm getting 'The uploaded file is empty' message - Image now added:
There is plenty of information on here advising how to fit the spring without losing your fingers - eg.
http://www.jampot.com/article_read.asp?id=49
Regards Mick
The spring looks to be correct - the short hook in the first photo goes through a convenient hole in the RH rear engine plate.
I'd add an image but it looks like the server needs attention - I'm getting 'The uploaded file is empty' message - Image now added:
There is plenty of information on here advising how to fit the spring without losing your fingers - eg.
http://www.jampot.com/article_read.asp?id=49
Regards Mick
You do not have the required permissions to view the files attached to this post.
Last edited by Mick D on Thu Mar 21, 2019 10:11 am, edited 1 time in total.
-
- Member
- Posts: 1176
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: KENT UK
Re: center stand spring anchor points?
Mick's right. Once you have the right hand side engine plate in position, it becomes a lot more obvious. Also check out the spring thing. its not difficult when you know how to do it
- cfaber
- Posts: 346
- Joined: Mon Nov 20, 2017 5:37 am
- Location: USA, Colorado
- Contact:
Re: center stand spring anchor points?
Thanks!
Fix it until it's broken!
Otherwise how will
anything get done?
Otherwise how will
anything get done?