AMOC Parts web site

General purpose topics/chat goes in here
SPRIDDLER
Member
Posts: 8542
Joined: Wed Sep 01, 2004 1:00 am
Location: WEST SUSSEX UK

Re: AMOC Parts web site

Post by SPRIDDLER »

Ouch! Poor Rob.
I've heard they put too much ethanol in that Poundshop Beaujolais.
'There is a tide in the affairs of men
Which taken at the flood............'
User avatar
Expat
Member
Posts: 1033
Joined: Thu Nov 12, 2015 2:22 pm
Location: Tennessee, USA

Re: AMOC Parts web site

Post by Expat »

:beer: :rofl: :rofl:
Keep shiny side up.

These are my principles, if you don’t like them, I have others. (Groucho Marx)
User avatar
Martin.S
Posts: 443
Joined: Sun Mar 18, 2018 12:02 pm
Location: Bristol UK

Re: AMOC Parts web site

Post by Martin.S »

No wonder he's been a little grumpy recently!
User avatar
ajscomboman
Member
Posts: 3963
Joined: Mon Jan 01, 1990 12:00 am
Location: HAMPSHIRE UK

Re: AMOC Parts web site

Post by ajscomboman »

Martin.S wrote:No wonder he's been a little grumpy recently!
Not recently, always!! Well according to my fans anyway. :rofl: :rofl: Anyway have you seen that I got so bored, Eamonn and I have created a separate L/W section. More sub categories will be added when the new bits arrive.

Come see the dynamic duo at the Bristol show, you won't be able to miss Roy and I.

PS, to all coming don't forget the biscuits!! :D :D
User avatar
ajscomboman
Member
Posts: 3963
Joined: Mon Jan 01, 1990 12:00 am
Location: HAMPSHIRE UK

Re: AMOC Parts web site

Post by ajscomboman »

G15 Roy wrote:
SPRIDDLER wrote:
G15 Roy wrote: On behalf of President Rob who is in A&E at this moment............
:shock:
I really hope it's not too serious. Never mind the spares, best wishes to Rob.
He is not to Bad all to do with a stone that he can't pass he send me a text each time he try's so far 48 messages. Now there's a cartoon thought for the Jampot.
Oih, Pinocchio, it was only 1 stone and a few messages, most of which were replies to your demands!!!! :headbang:
User avatar
Martin.S
Posts: 443
Joined: Sun Mar 18, 2018 12:02 pm
Location: Bristol UK

Re: AMOC Parts web site

Post by Martin.S »

Yes Rob - I did notice that there is now a separate section for the lightweights - much better thank you.
When you do add the new stuff will it be easy enough to take off the stuff that is now unavailable?
Hope you're better now.
Cheers
User avatar
ajscomboman
Member
Posts: 3963
Joined: Mon Jan 01, 1990 12:00 am
Location: HAMPSHIRE UK

Re: AMOC Parts web site

Post by ajscomboman »

The stuff that's unavailable we'll look to see if it's worth making again. All work in progress I guess. Gives me something to do before I go back to work.
ChrisTheChippy
Member
Posts: 274
Joined: Wed Feb 07, 2018 12:02 am
Location: Essex

Re: AMOC Parts web site

Post by ChrisTheChippy »

Had a look at the new format , much better and easier to follow. Can't wait to see what new goodies are arriving for the lightweights !
Great job . Thanks
Regards Chris
User avatar
ajscomboman
Member
Posts: 3963
Joined: Mon Jan 01, 1990 12:00 am
Location: HAMPSHIRE UK

Re: AMOC Parts web site

Post by ajscomboman »

ChrisTheChippy wrote:Had a look at the new format , much better and easier to follow. Can't wait to see what new goodies are arriving for the lightweights !
Great job . Thanks
Regards Chris
Thank you Chris. It's been a long time overdue but there was never enough time to carry out the work. It's taken Eamonn and myself months of working together to get in there and tidy it all up. (Sometimes being laid up can be a benefit)
There are some weird and wacky numbers created, which in reality just confuse matters. Unpicking it all would forever so I'm simply going through and adding original numbers to the descriptions. That way it should lead to the correct part.
However we probably won't have spotted everything so would still like feedback and queries to continue the tidy.
rcousine
Posts: 29
Joined: Wed May 23, 2012 6:13 pm
Location: British Columbia CANADA
Contact:

Re: AMOC Parts web site

Post by rcousine »

Reviving this old thread, I'm glad to hear Rob's stone passed, but do we have an update on progress getting more 000806 frame races made, or alternate sources? My rebuild is somewhat hung up at the moment...
1958 AJS 18 CS (a work in regress)
Ongoing rebuild photos: https://www.icloud.com/sharedalbum/#B16GWZuqDGvT59n
Locked