Hi.
My G80CS has a badly worn inlet tappet.
I understand the tappets are different to non-compy engine, which i can get....
What is the difference between compy tappets and "normal" G80 tappets?
Need to replace or repair this one.
Thanks
Tappet difference?
-
- Posts: 75
- Joined: Mon Jul 09, 2018 10:24 pm
- Location: New Zealand
- clive
- Member
- Posts: 5669
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LONDON UK
Re: Tappet difference?
Best to tell us the year of your CS in case it affects the answer. Personally I have not got a clue!
clive
if it ain't broke don't fix
if it ain't broke don't fix
-
- Posts: 75
- Joined: Mon Jul 09, 2018 10:24 pm
- Location: New Zealand
Re: Tappet difference?
It is a 1961 short stroke engine
-
- Member
- Posts: 8559
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: Tappet difference?
Above is an extract from the techy article below:
http://archives.jampot.dk/technical/Gen ... e_Dots.pdf
You do not have the required permissions to view the files attached to this post.
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
- cfaber
- Posts: 346
- Joined: Mon Nov 20, 2017 5:37 am
- Location: USA, Colorado
- Contact:
-
- Posts: 75
- Joined: Mon Jul 09, 2018 10:24 pm
- Location: New Zealand
Re: Tappet difference?
Great article thank u Spriddler.
I have found a new Tappet at JHS Racing.
Another question....
My inlet cam is marked "CI".
My exhaust has just an "E" stamped on the back side, and a "1" and single timing dot... what is this cam?
I have found a new Tappet at JHS Racing.
Another question....
My inlet cam is marked "CI".
My exhaust has just an "E" stamped on the back side, and a "1" and single timing dot... what is this cam?