g2 oil change
-
- Posts: 20
- Joined: Sat Dec 03, 2016 8:09 pm
- Location: Derbyshire UK
g2 oil change
1966 g2 csr,changing engine oil and cleaning filter.i have fibre washers on both drain plugs is this correct ?
D G SIMS
-
- Member
- Posts: 281
- Joined: Wed Feb 07, 2018 12:02 am
- Location: Essex
Re: g2 oil change
Hi ,
As far as I'm aware that is correct as I have fibre washers on both drain plugs on my matchless G2 plus fibre washer on oil filter . Hope that helps.
Regards Chris
As far as I'm aware that is correct as I have fibre washers on both drain plugs on my matchless G2 plus fibre washer on oil filter . Hope that helps.
Regards Chris
-
- Posts: 20
- Joined: Sat Dec 03, 2016 8:09 pm
- Location: Derbyshire UK
Re: g2 oil change
cheers chris for that although my oil filter has a copper washer.i suppose if it seals its ok to use either ,dave
D G SIMS
-
- Posts: 20
- Joined: Sat Dec 03, 2016 8:09 pm
- Location: Derbyshire UK
Re: g2 oil change
cheers for both replys lads,there is also a recess at the base of one drain plug,should it have an o ring fitted.
D G SIMS
- Ozmadman
- Posts: 2651
- Joined: Wed Dec 14, 2011 1:02 am
- Location: ESSEX UK
Re: g2 oil change
No o ring is fitted. Just a fibre Washer that is a sloppy fit as the thread is wider than the part of the plug where the was washer goesdunsweepin wrote:cheers for both replys lads,there is also a recess at the base of one drain plug,should it have an o ring fitted.
Paul
1960 Model 8
1974 Yamaha RD250B US Model 6 speed
1960 Model 8
1974 Yamaha RD250B US Model 6 speed
-
- Posts: 20
- Joined: Sat Dec 03, 2016 8:09 pm
- Location: Derbyshire UK