Apologies if I have added confusion I should have typed "Gearbox" sprocket not engine in the above reply.Duncan wrote:The engine sprocket bears on spacer 040131, if fits inside the mainshaft oil seal, this will not affect the depth of the clutch basket.
How to align engine- and clutch sprocket?
- Duncan
- Member
- Posts: 2136
- Joined: Thu Jul 10, 2003 1:00 am
- Location: HAMPSHIRE UK
Re: How to align engine- and clutch sprocket?
-
- Posts: 48
- Joined: Fri Jan 01, 1999 12:00 am
- Location: NSW AUSTRALIA
Re: How to align engine- and clutch sprocket?
Hi, I found a small wire ring inserted inside the spider,(at the deep end of the splines) helped with the clutch chain alignment.
-
- Member
- Posts: 610
- Joined: Mon Jan 01, 1990 12:00 am
- Location: NORTHAMPTONSHIRE UK
Re: How to align engine- and clutch sprocket?
Christian
once you have the correct nut for the clutch . To tighten it engage top gear and with the rear chain fitted
hold the rear brake pedal down then do the nut up
Tony
once you have the correct nut for the clutch . To tighten it engage top gear and with the rear chain fitted
hold the rear brake pedal down then do the nut up
Tony
-
- Member
- Posts: 8560
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: How to align engine- and clutch sprocket?
I hope Christian has sorted this by now as his enquiry was more than a year ago (April 2018), but he never said...........
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'