Hello can a kind member give me the part numbers for 1960 Model 14 not csr inner and outer gearbox gaskets, Gearbox outer cover screws/bolts with slotted heads, and the gear selector pawl spring.
Thank you
shifter
Model 14 spares
-
- Posts: 479
- Joined: Mon Jun 16, 2014 8:30 pm
- Location: NORTH
- dave16mct
- Member
- Posts: 3257
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
-
- Posts: 479
- Joined: Mon Jun 16, 2014 8:30 pm
- Location: NORTH
Re: Model 14 spares
Thanks Dave got all the parts I need except for the 6 outer cover screws, parts section have none and say they are very hard to get hold of, the ones I took out the heads split in half at the slots. I have lost/mislaid my parts book at the mo if I cant find it I will get my daughter to download one
shifter
Managed to salvage 3 screws so just need another 3
shifter
Managed to salvage 3 screws so just need another 3
Last edited by shifter on Mon Oct 16, 2017 1:56 pm, edited 2 times in total.
?
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Model 14 spares
041085. 6 off Hint ????? the two inspection cover screws are 1/2" 2 BA. Perhaps the 6 screws are 2 BA . try one of the cover screws. If it fits. Look for 2BA screws you can cut to suit length. I guess they won't fit, so discover the screw thread you want, and buy size or longer to cut down.shifter wrote:Thanks Dave got all the parts I need except for the 6 outer cover screws, parts section say they are very hard to get hold of the ones I took out the heads split in half at the slots. I have lost/mislaid my parts book at the mo if I cant find it I will get my daughter to download one
shifter
-
- Posts: 479
- Joined: Mon Jun 16, 2014 8:30 pm
- Location: NORTH
Re: Model 14 spares
I managed to get a set from Andrew engineering today thank you for the help
shifter
shifter
?
-
- Posts: 2884
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: Model 14 spares
Hi
If they are a standard design 2BA cheese head these people can help:
http://www.namrick.co.uk/acatalog/Home_ ... d_132.html
Failing that measure one of the salvaged ones to determine the thread and post a photo - pretty sure they will be available somewhere.
Regards Mick
If they are a standard design 2BA cheese head these people can help:
http://www.namrick.co.uk/acatalog/Home_ ... d_132.html
Failing that measure one of the salvaged ones to determine the thread and post a photo - pretty sure they will be available somewhere.
Regards Mick
-
- Posts: 479
- Joined: Mon Jun 16, 2014 8:30 pm
- Location: NORTH
Re: Model 14 spares
Thanks Mick
I got a set ordered from Andrew Engineering this afternoon
shifter
I got a set ordered from Andrew Engineering this afternoon
shifter
?
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Model 14 spares
I'm sure the little 2ba screws that hold the inspection cover would have been smaller dia. They are also a standard fitting used since prewar era in many places on a bike. Anyway screws required now found.