!959 g12 clutch centre boss

Information relating to the Matchless G12 or AJS Model 31 650cc twin
Locked
vrossi46
Deceased
Posts: 43
Joined: Thu Jan 23, 2014 10:53 am
Location: WEST MIDLANDS UK

!959 g12 clutch centre boss

Post by vrossi46 »

Morning all. I am trying to remove the clutch centre boss from the output shaft of my G12. The primary chain, clutch plates and basket have been removed, and also the shock absorber cover plate. The workshop manual sugests that the boss should slide off the output shaft spline, but it will only move about 1/2" before it jams solid on the spine. Am I missing anything? Has anyone come across a similar problem?
Cheers.
User avatar
dave16mct
Member
Posts: 3234
Joined: Mon Jan 01, 1990 12:00 am
Location: LANCASHIRE UK

Re: !959 g12 clutch centre boss

Post by dave16mct »

The club sell a puller which will pull it straight off.

Dave.
vrossi46
Deceased
Posts: 43
Joined: Thu Jan 23, 2014 10:53 am
Location: WEST MIDLANDS UK

Re: !959 g12 clutch centre boss

Post by vrossi46 »

Many thanks Dave. I've just viewed the tool on the shop site. Looks to be just the job.
Dave.
Locked